Do you need a professional electrician to carry out work on your home but you’re worried about costs? This article explains how much electricians cost per hour, the type of jobs they can help you with, and how you can hire the right person for the job while staying within your budget.
Most homeowners will pay between $100 and $600 for an electrician to visit their home and complete electrical work. Service call out fees (covering the first hour) range between $100 and $200, while hourly rates range from $50 to $130.
Naturally, the cost of their visit will vary based on the type of work carried out, the time it takes to complete it, the license required, and the electrician’s experience and seniority.
To help you estimate the cost of your electrical project, we outline electrician costs by job type below. However, we always recommend getting multiple quotes from electricians before hiring the one that best fits your needs, budget, and timescale.
Electrician costs by job type
Electrical work costs $100 to $600 on average for small jobs or $2,000 to $10,000+ for large projects. According to HomeGuide, costs are:
Job type
Average electrician cost
Replacing a switch or outlet
$50 to $250
Outlet grounding
$100 to $300
Installing a new outlet or switch
$100 to $350
Installing three-way switches
$100 to $200
Replacing a circuit breaker
$100 to $160
Wiring a house
From $4,000
Wiring a garage
$1,000 to $7,500,
Wiring a basement
$800 to $1,500
Replacing a switch or outlet
Replacing a switch or outlet is a quick and easy job that takes around 30 minutes. However, the electrician will charge a minimum labor period plus a call-out fee. That’s why, when you call out an electrician, mention any other outlets you want to replace or add to your house, as doing multiple changes in one call-out is more cost effective.
Expect electrician costs for a switch or outlets replacement to range from $50 to $250.
Outlet grounding
Older homes come with 2-slot outlet receptors. If this is your case, you might want to replace them with a 3-slot grounded outlet that accepts 3-pong plugs.
An experienced electrician will have no trouble converting the 2-slot outlets into 3, given that the fuse box or circuit breaker panel is completely grounded.
This type of job might take the electrician approximately 30 minutes, with the cost averaging around $100 to $300. If the electrician needs to establish grounding with the breaker panel, the bill can be doubled.
Installing a new outlet or switch
Installing a switch or new outlet where none exists involves:
Creating an opening in the wall.
Fishing new cable to a power source.
Installing a new wall box and device.
Making the connections.
This is a fairly easy job for an experienced electrician. For this type of job, the average rate and cost range from $100 to $350.
Installing three-way switches
Three-way switches may require more installation time; expect at least two hours for a set. The cost will be between $100 to $200 per switch.
The bill can go up if the electrician installs more sets in different locations. Jobs that require new cables and wall boxes cost more too.
Replacing a circuit breaker
Many homeowners are comfortable replacing circuit breakers because it’s relatively easy. Homeowners who decide to do it themselves can expect to save about $10 to $40 per device.
The national average cost for hiring a professional to replace a bad box circuit can range from $100 to $160, including materials and labor.
Wiring a house
The supplies alone will cost $4 to $9 per foot. Depending on how accessible the wiring lines are, you might easily end up paying $1,200 or more for electrical wiring. The job will take substantially less time if the location for new wiring is accessible, such as during a makeover when the walls are open.
By calculating the linear footage of all walls and multiplying by $9, you can get a fairly accurate estimate of rough-wiring costs. A typical 2,000 square-foot house, for example, contains around 450 linear feet of walls. On average, the cost of wiring a house is around $4,000.
While these rough-in rates include cable and electrical boxes, they do not include device or light fixture installation, which is an extra fee.
Wiring a garage
It's not uncommon for an old garage to be completely devoid of electrical service. However, the 2017 amendment to the NEC (National Electrical Code) mandates that each car bay be supplied by at least one 20-amp circuit with at least one GFCI-protected duplex receptacle.
In general, you are not compelled to renovate an existing garage to comply with new code standards, but you may choose to do so to stay compliant. It might be a selling factor if you decide to seel your home in the future.
The cost of adding circuits to a garage ranges from $1,000 to $7,500, with the highest end of the spectrum indicating detached garages where an underground feeder wire from the main service panel to the garage must be installed beneath the ground.
Adding one or more wall outlets, light fixtures, and electrical circuits is part of finishing a basement, which is a fairly frequent home remodeling project.
Depending on the number of recess lights and beds in the basement, wiring a 1,000 square-foot area can cost anywhere from $800 to $1,500.
The lower price range is for vast open spaces, while the higher price range is for basements that have been separated into individual rooms. If an electrical sub-panel is required, or if your basement will have complex multimedia wiring, costs may increase.
Hiring the right electrical contractor
Most electrical work requires special skills, safety precautions, and knowledge. You’re always best hiring a professional who is experienced and comes highly recommended.
To find the right electrician for your needs and budget, make sure to get a quote for your project and ask for references. Additionally, ensure that all expectations are written down and that you fully comprehend the work's terms and conditions.
Talk to your contractor about what will happen if you aren't satisfied or if the bid is changed due to unanticipated events. Examine any warranties and make sure you understand everything in the estimate. Ensure that your electrician is properly licensed and insured.
Need a site plan for your upcoming project? We can help! MySitePlan delivers site plans in as little as 24 hours. Order yours now.
An electrician’s hourly rate will vary based on their skills and experience, but you can expect to pay anywhere from $50 to $130 per hour. The first hour (usually referred to as a call out fee) is a little more and ranges between $100 and $600.
What should I do if the electrical work needed is beyond what was initially estimated?
Discuss the situation with your electrician or contractor to understand the reasons for the additional work and costs. Request a revised estimate or quote that reflects the new scope of work.
How often should I have my house's electrical system checked by a professional?
It's advisable to have your electrical system checked every 3 to 5 years. However, older homes or homes with known issues should be inspected more frequently.
What are the risks of DIY electrical repairs?
DIY electrical repairs can pose serious risks, including electrical shocks, fires, and potential violation of local codes, which may result in fines or difficulties in selling your home later.
How can I verify the license and insurance of an electrician?
You can verify an electrician's license and insurance by requesting to see their up-to-date credentials. In the U.S., you can also check with your state's Department of Professional Regulation or Licensing Board.
What should I consider before deciding to upgrade the electrical system in my garage?
Consider the current electrical needs, the condition of existing wiring, compliance with local codes, and future usability. Also, evaluate whether the investment increases the property's value or functionality.
How can I ensure that the electrical contractor's work will last?
Look for contractors who offer warranties or guarantees on their workmanship. Ensure that the materials used are high-quality and compliant with industry standards. Regular maintenance will also help prolong the lifespan of the electrical installations.
What are the consequences of not complying with the NEC when modifying a garage?
Non-compliance can lead to safety hazards, fines, and issues with insurance claims in the event of an accident. It may also impact the resale value of your home.
This post was originally published on February 7th, 2022. It was updated on August 28th, 2024 to reflect changes.